MICRO-200 Car Battery Conductance Tester/Analyzer for 12 Volt Vehicles Multi-language

En stock. Numéro d'article: No.AD112

Achat immédiat: 30.99
Livraison:
Livraison gratuite Poste Ordinaire ServiceDélai de livraison estimé: 12-25 jours de travail. Détails »
Poids:
0.3KG
Paquet:
18.5cm*13cm*6.5cm     ( Inch: 7.26*5.11*2.55 )
Résultats:
Retour de remboursement dans 7 jours, l'acheteur paie les frais de retour. Lire les Détails »

Description du produit

Battery Conductance Tester MICRO-200 adopts currently the world's most advanced conductance testing technology to easily,
quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery, healthy state of the battery itself, and common fault of the vehicle starting system and charging system, which can help maintenance personnel to find the problem
quickly and accurately, thus to achieve quick vehicle repair.
MICRO-200 Car Battery Conductance Tester

There are three language versions:

AD112 Mainland Version: Japanese, Korean, Russian, English
AD112-B Nordic Language version: English, Dutch, Swiss, Finnish, Norwegian, Danish
AD112-C Western European language version: English, French, German, Spanish, Italian, Polish

Product specification:

1. One year warranty and lifetime maintenance
2. Application:12V automotive cranking lead acid battery and 12v car system test
3. Measure Range:?
Measure Standard Measure Range
CCA 100-2000
BCI 100-2000
CA 100-2000
MCA 100-2000
JIS 26A17--245H52
DIN 100-1400
IEC 100-1400
EN 100-2000
SAE 100-2000
GB 100-1400
?
4. Working Environment Temp:-20℃-50℃
5. Special test clip:Double conductor Kelvin clamp?
6. Housing Material :Acid-resistant ABS plastic
7. Measure Range:30AH-200AH
8. Voltage Measure Range:7-30VDC

How to use:

1. Connect the red test clamp with battery anode and the black one with cathode, the tester will power on automatically.
? ? ?Voltage battery below 7.0VDC can’t be tested properly, then press OK key to continue.
2. According to the tester, you can press UP/DOWN key to choose:?
? ? ?battery test
? ? ?starting system test
? ? ?charging system test
? ? ?battery test result
? ? ?print test result
? ? ?elect language?
?
Perform Battery Test:
Select the battery test and press OK key to continue:

?
Input testing standard: the standard which you can see the front of the?battery, such as CCA, BCI, DIN.?If you can’t find any info about the standard, you can choose GB standard. Choose GB standards would lead little tolerance.
Input rated capacity: you can see the starting current standards in front of the battery .Such as BCI/300A.
Then press OK key to start testing.
?
Note:

For power loss battery (such as a vehicle for a long time on hold, the battery is not charged in time; forget to close the lights, the doors resulting in serious loss of battery electric vehicle and can not be started, etc.), in the actual testing process may also be prompted to?"Please replace the battery."
for such batteries, please consult the battery manufacturers, and then tested.
?
Starting system test:
After entering the second start system test functionthe press OK key?as follows:



Starting the engine as prompted, the?tester will automatically complete the cranking test and display the result.



Normally, cranking voltage value lower than 9.6V is regarded as abnormal and it is OK if it is higher than 9.6V.?
Test result of the tester includes actual cranking voltage and actual cranking time.
?


When?the?cranking test is abnormal, battery test result will also be displayed at the same time.
?


This is for the convenience of the maintenance personnel to quickly know the whole state of the starting system according to the data.?

Charge system test:
When enter the charging test,?the?tester will prompt "Loaded testing"?


Note: Do not shut down the engine during the test. All electrical appliance and device are in OFF state. Turn on/off any electrical
appliance in the vehicle during the test will affect the accuracy of the test result.


Operate accordingly to increase the engine rotating speed to 2500turns, and keep for 5 seconds.
?


Tester starts the charging volt test after increase rev detected.



After the test finished, tester displays the effective charging volts, ripple test result and charging test result.?



NOTE:?If no increase rev detected, it shall be the fault of generator regulator or connection with battery failed. Tester will try 3 times to further detect, if still failed, it will skip the increase rev detect and the test result displays "No Volt Output".?
Check the connection between generator and battery, then retest.
?
Charge?Test Result:
?
1. Charging Volt: Normal. The generator output normal, no problem detected.
2. Charging Volt: Low. Check drive belt of the generator whether slip or running off. Check the connection between generator and battery is normal or not. If both of the drive belt and the connection are in good condition, follow the manufacturer's suggestion to eliminate generator fault.
3. Charging Volt: High. Since most of the vehicle generators are using internal regulator, the generator assembly has to be replaced.(Some old style cars are using external regulator, then directly replace the regulator.) The normal high volt of the voltage regulator is maximum 14.7±0.5V. If charging volt is too high, it will overcharge the battery. Therefore, the battery life will be shortened and troubles will be caused.
4. No Volt Output. No generator volt output is detected. Check the generator connection cable, the drive belt of generator and engine whether normal or not.
5. Diode Test: Through the test of charging current ripple, tester will find out whether the diode is normal or not. When ripple volt is too high, it proves at least one diode is damaged. Check and replace the diode.

View test result:
After entering the forth function, then press OK key you can view the final test result.
?
Print test result:
About Printing function, please contact with customer service to get the download link.
?
Select a language:
After entering the language function, can press up/down key to choose it.

Package includes:
?
1pc x MICRO-200

Colis sera envoyé à l'adresse enregistrée sur paypal uniquement

Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.

Attention les risques viennent de la douane:

1. Les colis DHL envoyés vers l'outre-mer de la france (Martinique, Réunion, Guadeloupe etc. ) ont peut-être des frais de douane, merci de votre compréhension.
2. Certains produits speciaux vers la France: Lexia 3 PP2000, Renault Can Clip, Multidiag Pro, Multidiag Actia, MB Star série etc. le mode de livraison est Yanwen EMS, délai de livraison est 8-13 jours.

Contact informations:

Email: sales@obd2diy.fr
Skype: diyobd.fr
Téléphone: +86 15696171957
Whatsapp:
+86 15696171957
+86 15826108827

Whatsapp Groupe:
Gog3moWHhEK3a9kDP1JXLR

Facebook:
https://www.facebook.com/obd2diy2011/
Si vous avez des questions, n'hésitez pas à nous contacter.