Wifi BEZN C6 OEM DOIP Xentry Diagnosis VCI Multiplexer Avec HDD 2023.6

Numéro d'article.SP332+SP332-S En rupture de stock. Histoire 8 vendu.

Achat immédiat: 447
Poids:
0.8KG
Paquet:
23cm*21cm*7cm ( Inch: 9.03*8.25*2.75 )
Résultats:
Retour de remboursement dans 7 jours, l'acheteur paie les frais de retour. Lire les Détails »

Description du produit

Wifi XENTRY Diagnosis VCI (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

WIFI BEZN C6 OEM DOIP Xentry Diagnosis VCI Multiplexer With HDD 2023.6

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:

Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)
Software Version: 2023.6

What is DOIP?
DOIP is ISO 13400 diagnostic protocol


ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.

The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.

The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as: enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);  WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.

The mercedes  Land Rover JLR all use this new Diagnostic Protocol now.

Where do you need DOIP device?

when we test mercedes new car like w222 w205


In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Features:

  • Can be used for all model series of For Mercedes For Benz vehicles

  • Support DoIP, cover more functions during SCN Coding than SD C4/C5

  • Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on 

  • Diagnosis updates no longer necessary – firmware updates required on rare occasions

  • Does not need a power supply unit for external power supply

  • Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)

  • Engines (All Gasoline & Diesel Systems)

  • Transmissions and Electronic Selector Modules

  • Airmatic and Active Body Control Suspension Systems

  • Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems

  • Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s

  • Drive Authorisation System

  • Sam (Signal Acquisition) Modules

  • Electronic Ignition System (EIS)

  • Pneumatic System Equipment and ATA functions

  • Air Conditioning / climate control Systems

  • Instrument Cluster

  • Tyre Pressure Control

  • Parktronic System

  • Keyless Go

  • D2b Command & Audio Gateway (D2B and MOST networks)

  • TV Tuner

  • Headlamp Range Adjustment

  • Seat Electronics

  • Rvc, RST & Vario Roof modules

  • Automatic Clutch System ACS

  • M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)

  • Assyst & ASSYST + systems


Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

Notice :

1. Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2. ThisMercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can/'t support All Key Lost,needs one key at least.

Packing List 

1 * BEZN C6  Scanner 
1 * HDD


Colis sera envoyé à l'adresse enregistrée sur paypal uniquement

Contactez-Nous:

Email:
sales@obd2diy.fr
Skype: diyobd.fr
Whatsapp: +86 17308368390

Facebook
https://www.facebook.com/obd2diy2011/

Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.