Votre panier
Accueil
Accueil - Des produits - OBDII Pièces et Accessoires - J-Link JLINK V8+ ARM USB-JTAG Adapter Emulator
« Revenir
J-Link JLINK V8+ ARM USB-JTAG Adapter Emulator

J-Link JLINK V8+ ARM USB-JTAG Adapter Emulator

Numéro de l'article. SO270
0 étoiles, sur 0 avis.
En stock
Achat immédiat:€15.47
Quantité:
    
Les frais d'envoi:
Livraison Gratuite     Poste Ordinaire Service 
Délai de livraison estimé: 10-20 jours de travail. Détails
Poids:
0.1KG
Paquet:
10cm*5cm*2.5cm        ( Inch: 3.93*1.96*0.98 )
Retours:
Retour de remboursement dans 7 jours, l'acheteur paie les frais de retour.Lire les Détails »
Acheter des produits connexes et obtenir un bon prix!
Featured
V2.23 KTAG K-TAG Firmware V7.020 Plus Kess V2 V2.23 Firmware V5.017 Version En Ligne Illimité Token
(Numéro de l'article. SE135-B-SE137-B)
V2.23 KTAG K-TAG Firmware V7.020 Plus Kess V2 V2.23 Firmware V5.017 Version En Ligne Illimité Token    Plus de détails »
Livraison gratuite
Prix de détail:€245.00 Achat immédiat:€230.00 6% off
Taille/Spec: SE135-B+SE137-B   
Quantité:   
Ajouter au panier
KESS V2/Ktag Chip Plus J-Link JLINK V8+ ARM USB-JTAG Adapteur Emulateur
(Numéro de l'article. SO242-B)
KESS V2/Ktag Chip Plus J-Link JLINK V8+ ARM USB-JTAG Adapteur Emulateur    Plus de détails »
Livraison gratuite
Achat immédiat:€21.80
Taille/Spec: SO242+SO270   
Quantité:   
Ajouter au panier
JLINK / J-LINK V8 Simulator ARM USB JTAG is full version and support firmware updates, J-LINK V8 supports ARM7, ARM9, ARM11, Cortex-M3 core, ADS, IAR, KEIL development environment.

IAR J-Link JLINK V8+ ARM USB-JTAG Adapter emulator

J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.
With the IAR EWARM, ADS, KEIL, WINARM, RealView and other integrated development environment supports all ARM7/ARM9 core chip simulation
Through RDI interface and the integrated development environment for seamless connectivity, easy, convenient connections
Easy to learn, is learning and developing ARM best and most practical development tools.
 

V8.0 is improved version of V7.0:

(1) Improving the SWD interface circuit, the use of counterfeit JLINK V8 JTAG debug debug mode can be normal when debugging CORTEX-M3 core chips will not use SWD functionality
V7 hardware SWD part with the V8 not the same, if forced to switch to SWD mode, JLINK the main chip will be destroyed!
JLINK V8 interface circuit using two-level converter chip, using a level converter chip will be fake V8!

(2) V8.0 using two-color LED can indicate more work status, V7.0 only an LED indicator light.

(3) To optimize the firmware structure and function of the firmware upgrade bootloader area to move to double the size of the application area Easy to add new features;

(4) Support for ARM11 better and faster than JLINK V7, is the first choice for ARM11.
 

Other Hightlights of J-LINK V8:

1) J-Link V8 use AT91SAM7S64, expanding the capacity of Flash and SRAM to facilitate future upgrades;

2) J-Link V8 improves the SWD interface, an increase of driver chips, (V6 and V7 in the SWD is a direct quote from the pin to the target CPU board);

3) J-Link V8 SWD improved control methods, V7 is the I / O direct-drive, V8 with a special method, there is not effective anyway V8`s SWD velocities slower than the V7

4) J-LinkV8 have three lights, one directed USB Communications, a direct target CPU, reset state, a direct 5V output is turned on V7 only 1 USB communication indicator

5) J-Link V8`s firmware update process is not DLL, and can not write the same as V7 Bootloader on a simple easy to crack V8`s Bootloader need to implement USB device connectivity;
 

J-Link ARM Features:

1. IAR EWARM integrated development environment seamlessly connected JTAG Emulator
2. Support all ARM7/ARM9 core chips, as well as cortex M3, including Thumb mode
3. Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment
4. Download speeds of up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
5. The maximum JTAG speed 12 MHz
6. Target board voltage range 1.2V-3.3V, 5V compatible
7. Auto speed recognition
8. Monitoring all JTAG signals and target board voltage Fully plug and play
9. Use the USB power supply (but not the target board power supply)
10. With a USB cable and 20-core flat cable
11. Support multi-device JTAG serial connection
12. Standard 20-core JTAG emulation connector
13. Optional 14-core JTAG emulation connector
14. Optional adapter for 5V targets board
 

J-Link support for ARM cores:

* ARM7TDMI (Rev 1)
* ARM7TDMI (Rev 3)
* ARM7TDMI-S (Rev 4)
* ARM720T * ARM920T
* ARM926EJ-S
* ARM946E-S
* ARM966E-S
* ARM11
* Cortex-M3
 

Product Specifications:

USB power supply, the whole current <50mA
USB Interface USB 2.0 full speed 12Mbps
Target board interfaces
JTAG (20P)
J-Link and target board serial data transfer speed between the 12MHz maximum
Supported target board voltage 1.2 - 3.3V, 5V compatible
Target board power supply voltage 4.5 - 5V (provided by the USB 5V)
Target board power supply current max 300mA, with overcurrent protection
°C ... +60°C">Operating temperature +5 ° C ... +60 ° C
°C ... +65 °C">Storage temperature -20 ° C ... +65
Humidity <90%
Size (without cables) 100mm x 53mm x 27mm
Weight (without cable) 70g
EMC EN 55022, EN 55024

Supported Operating Systems:

Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
 

Package List:

1x Jlink V8.0 emulator
1x 20P line of a standard JTAG
1x USB line


Colis sera envoyé à l'adresse enregistrée sur paypal uniquement
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Quel est le sens de QC marque sur produit?

1. Le QC marque signifie que ce produit a passé letest de notre ingenieur.
2. Le QC marque signifie que le produit est de notre société.
3. Le QC marque signifie que le produit obtiendra la garantie.

Attention les risques viennent de la douane:

1. Les colis DHL envoyés vers l'outre-mer de la france (Martinique, Réunion, Guadeloupe etc. ) ont peut-être des frais de douane, merci de votre compréhension.
2. Certains produits speciaux vers la France: Lexia 3 PP2000, Renault Can Clip, Multidiag Pro, Multidiag Actia, MB Star série etc. le mode de livraison est Yanwen EMS, délai de livraison est 8-13 jours.

Avis de membre diyobd2.fr:

Nous utilisons le nom de domaine http://www.obd2diy.frhttp://www.obd2france.com et http://www.diyobd2.fr à la fois, peut également visiter, nous les transférerons à le même nom de domaine:www.obd2diy.fr. Veuillez l'ajouter aux favoris. Les anciens clients peuvent se connecter directement. Tout conseil, envoyez-moi un courriel, merci pour votre confiance et votre soutien.

Contact informations:

Email: sales@obd2diy.fr
           sales@diyobd2.fr
           sales@obd2france.com
Skype: diyobd.fr
Wechat: lilaszhou

Facebook: https://www.facebook.com/diyobd2.fr/
Si vous avez des questions, n'hésitez pas à nous contacter.
 
L'état de votre commande